Sidewall Conveyor Belt optimization improvements

To make the body sidewall conveyor belt carrying capacity is increased, sidewall conveyor belt body lateral bending load after minimal sidewall conveyor belt body that enhance

lateral rigidity is to reduce the lateral load deformation increases with body belt body carrying capacity of key . Lateral sidewall gravity conveyor body rigidity value refers

With a transverse vertical cross section of the body, with the body of free support on both sides of the edge, because sidewall conveyor belt body weight caused by band bending

under the weight of the body with body width value ratio. High lateral stiffness of the lateral rigidity sidewall gravity skatewheel conveyor technical standards is not greater than 0.05, the

right ribs lose

Belt structure with optimized and improved, additional lateral stiffness to enhance the lateral stiffness detector layer is 0.036, with a reduced lateral deformation after

carrying body, can increase the bearing capacity of 15% to 20%. Improved lateral stiffness large heavy sidewall conveyor belt is an effective measure to the body of the multi-

level baseband

Canvas interlaminar tensile body set up by special mixing and calendering dedicated polyester staple fiber composite layer, ie within a layer of polyester staple fibers in one

direction along the lateral arrangement with body buried layer. This has the sidewall conveyor belt body lateral bending capacity enhancement of the use of special composite

layer

The belt body lateral rigidity than conventional construction increased 2.5 times sidewall conveyor belt, even if its value is determined by lateral rigidity increased to 0.036

0.09.