Roller conveyor with specifications and technical parameters

Roller conveyors Use
The gravity roller conveyor applications, the use of open-or steel shielding cover to avoid increasing the friction in the bearings. Although the application of the bearing

temperature can be as high as 170 ℃, but the steel shielded bearings, temperature should not exceed 100 ℃, because the shielding cover will be deformed. At 0 ℃ ~

Outside the range of 65 ℃, you need to take into account the particular lubrication problems. At higher temperature of use, to increase the interval of the load belt, and move

quickly to reduce the absorption of the heat roller. And preferably with roller cooling device. The load capacity is determined by roller bearing negative

Load capacity and drum width determines. Basic bearing load capacity is determined by empirical formulas and experimental testing may be. And is based on a narrow width conveyor

to nominal, such as width increases, resulting in deformation of the shaft due to the load capacity of the drum down, gravity roller conveyor of load capacity

With the selected components have a great relationship, based on electric drum, frame, frame combinations may be. There are different shapes due to processing direct pressure,

curly style and molding type three assembly methods, the skeleton track roller assembly, may be higher or lower than the skeleton, completely depending on the application

requirements

May be, such as the drum below the skeleton track, the track can be when the rails with a skeleton without install another security fence; However, as with wide load, because

the load is interfering with the skeleton can not be used. Relatively higher than the skeleton drum way to install another security hurdle, more flexibility in the application.

The most common types are channel steel skeleton, L shaped steel or flat pattern. In forming mode distinction can be bent into shape and constructed with steel, Structural steel

heavy weight, strength, better for heavy loads, usually on both sides of the conveyor is to use the same steel, the use of support

Beam to be welded or bolted. However, some of the specific needs of the application, the type is not the same on both sides of the skeleton. With more cylinders, with better

transport properties and load capacity and better traction when cornering sex. Also, such a structure also has three forms of fish bone skeleton design

Module, due to its automatic tracking of the center, to make the load to the center line of the conveyor movement.
Roller conveyors technical parameters
Customized Roller Conveyor Please call or check the following technical parameters:
1, the transport object length, width and height;
2, the weight of each conveying unit;
3, the bottom of the conveyance object condition;
4, any special requirements on the work environment (for example: humidity, high temperature, the effects of chemicals, etc.);
5, the conveyor is unpowered motor driven type or style.
In order to ensure smooth transport of goods, at any point in time must have at least three objects remain in contact with the conveying roller. Packaging of soft bags when

necessary Gato plate conveyor.
1, the length of the drum selection:
Different widths of the goods should be selected fit the width of the drum, under normal circumstances the use of "conveyed +50 mm".
2, the drum wall thickness and shaft options:
According to the average distribution of the weight of the transport to the contact roller, the calculated load required for each cylinder to determine the wall thickness and

the roller shaft.
3, the drum material and surface treatment:
According to convey the different environment, the material used to determine the drum and surface treatment (galvanized steel, stainless steel, black or plastic bag).
4, select the drum installation:
According to the specific requirements of the overall airport conveyor select drum installation: spring loaded type, inner tooth axis, the whole flat tenon, through the axle pin-hole

and so on.
Turn machine for tapered roller, the roller surface width and taper, as the cargo size and turning radius may be.