Conveyor belt structure and properties of the core material

Conveyor belt core common structure plain, cord, straight through the whole weaving and other forms. 1 plain weave structure
    Plain structure with a core of traditional canvas class structure, characterized by latitude and longitude lines under interleaving, intersection many, structured weave wave

(or weave shrink). Weaving the canvas class wave elastic elongation rate increases with the core of the rubber belt conveyor belt into a longitudinal and lateral flex grooves favorable, but

the fiber strength

Negative utilization. Plain weave structure woven canvas belt core classes used in the processing capacity, wide application. 2 cord structure
 Plain cord structure and compared with the structure, high strength, warp, weaving wave is small. With its production of Incline Belt conveyor belts run straightness, small elongation,

bending fatigue resistance, used for the manufacture of short center distance endless belt. This structure with a core resistance to lateral tear poor performance, dimensional

stability is not

Good. 3 Diameter Structure
 Diameter structure from the main warp, weft and warp knitting of three parts. Latitude and longitude lines are not down intertwined, weaving warp and weft warp from the fixed

main role. The biggest characteristic of this structure with a core of high strength, low elongation, impact resistance, tear, suitable for the manufacture of single and double

core with core

Belt. 4 Overall braid
 Overall weaving multilayer woven structure can be divided into warp, weft and overlapping lines of three parts. Weft mostly 3-5 layers, was flat state. Is interwoven warp slash

down, stacked line is attached to the surface of the cotton belt core. The structure is characterized by density, loose tissue thickness can be obtained

Degree, high strength heavy-duty belt core. Braided structure has a strong integrity, impact resistance and tear resistance, flex, high strength mechanical joint. 5 twist grain

structure
 Twist grain structure, also known as mesh structure. The structure of the fiber arrangement is very sloppy, weft, high strength, warp processing stereotypes only play the role

of non-tensile fabric. This structure is used as a buffer in the conveyor belt fabric liner layer to improve the fabric conveyor belt and steel cord conveyor belt impact

Strike and tear resistance. The rigid and flexible structure of the points, the rigid structure of the weft material is 1.3-2.0mm in diameter of fine wire, flexible structure

weft material is generally a high strength polyamide (nylon) cords.