Roller conveyor belt maintenance

Roller conveyor belt routine maintenance :
1 , ready to repair the film , size, and consistent cutting surface , the thickness is consistent with 90 degree turn conveyor the original plastic cover ( such as multi-layer thick enough to fit ) ,

four peripheral bevel cut ( cold bonding with vulcanized film , hot sticky with unvulcanized film ) .
2, according to the plastic cover damage status can be round or diamond repair damaged around the outline along at least a large out 15 ~ 20mm, cut repair lines drawn to the

miter angle of 45 degrees , and the roller conveyor plastic cover strip corrupted . Be careful not to damage when cutting fabric layers below .
3 , such as heat curing adhesive patch is available . Refer to the tape bonding process .
4 , laminating film and fully patched rolling real prison , the presence of excess glue around the edges lightly with a piece knife slicing flat.
5 , mend and patch fight hair , clear plastic debris impurities, clean, and place in the repair patch glue brushing at least twice, and dried thoroughly .