Advantages and disadvantages of vibrating conveyors

Vibrating feeder machine more types of materials transported from the large stones to powdered materials can be, but also transport larger abrasive and high temperature

materials. Conveyors and mechanical vibration mode electromagnetic drive in two, all the way to vibrational motion conveying materials.
The basic vibrating conveyor are mounted on a rigid frame from the upper plate by a hinged spring or a tank supported composition, material handling is the use of mechanical or

electromagnetic means to swing back and forth trough effect. Its structure type and drive type with the application. Vibrating tank mounted on it right

The fundamental role of bulk solid material is thrown upward and forward material particles, so that the material along the trough to form a series of short jumps forward.
Conveyor trough vibration caused by electrical or mechanical. After the force conveyor trough for forward and upward movement of the material also will be tossed, tank back down

and backwards when moving the material is relatively forward some distance down. This repeated cycle of movement, with this conveyance

Type, so that the material of the chain conveyor trough constantly move forward.
The material being transported along the tank by changing the flow rate of the vibration amplitude or frequency to adjust. It is widely used to make vibrating trough feeder, for

example, the vibration tank mounted directly below the hopper to control the discharge rate.
The advantage of vibrating conveyors
Can transport heat and abrasive materials, even when conveying high temperature material for the tank insulation without affecting the conveyor moving parts; material during

transport by water, steam jacket, through the hot air, infrared light materials are cooling, drying or dehydration, and other operations

For; own cleanup function can eliminate pollution, and can meet the health standards; equipment can be covered, so airtight and dustproof. Separated using a computer with a

conveyor trough different materials can be transported simultaneously without generating mixed; a vibrating conveyor can set up multiple discharge points in the middle,

May be simultaneously or alternately discharge; vibrating conveyor simple structure low headroom required; order to isolate the bulk material and coarse sieve, sieve can be

added; vibrating conveyer general required power is low, especially the natural frequency ( natural frequency) type.
Disadvantage vibrating conveyor
Since the relationship between economy and design limits the length of the vibrating conveyor (usually single single drive vibration conveyors generally not more than 100m);

transmission capacity is limited (to 30m long vibrating conveyor with a capacity of 350t / h); adhesion of the material can not be transported, to make certain materials broken

Crack; gas-containing materials can not be transported as easy to overflow the tank bottom or float moves along the thin layer of material; generally can not be used to

transport into items; not large angle upwardly inclined conveyor material (generally 10 to 15 degrees left and right); electromagnetic vibrating conveyor drive is noisy; pair

construction

Buildings with vibration; does not reverse transport; requires heavier and more support frame.