Tubular conveyor installation debugging knowledge

Tubular belt conveyor is designed to introduce patented technology for a variety of complex terrain conditions for a variety of bulk materials transport density 0-2.5t/m3 ,

using ordinary tubular tape Operating ambient temperature range -25 to +40 ℃; any special requirements , with special specifications transportation

Allowable working environment with temperatures up to +160 ℃. Tubular belt conveyor application basically industrial belt conveyor no restrictions , no material transport can be employed , the typical

material handling are: ore , coal, coke , limestone, gravel , shale and alluvial soil . Some get very tricky materials, such as : steel thick

Shrink , petroleum coke , clay, slag, concrete, metal waste, wet fly ash, tailings , bauxite and dust , etc., can also be a tubular belt conveyor . The product can be widely

used in electricity ,material handling conveyor  building materials , chemicals , mining, metallurgy , port, harbor , coal, grain and other

Industry material handling systems. Because of its unique properties , widely used in foreign countries , the application is still relatively small in our country .
Tubular belt conveyor as a new way of transporting coal , has been widely used in foreign countries , because of its unique approach and superior general characteristics of the

belt in the country are increasingly being used in many power plants. Introduced the tubular belt conveyor installation and commissioning of construction technology and methods

for

Future coal belt conveyor installation and commissioning of accumulated experience .
Debugging tubular belt conveyor
Tubular belt conveyor to be installed, after acceptance , and the need for lubrication of the gear portion fill up empty load debugging. Observe the operation of reducer, motor,

rollers, belts and other equipment to record good reducer, motor , roller heat and vibration conditions . Special

Do not over- section belts to observe the operation , see section can put excessive volumes of tubular belt flat belt , flat belt into the tubular belt , when does not work,

stick to adjust excessive care segment . When the overlap is not part of the six tubular belt idlers are upper PSK , the PSK to be adjusted

Idlers .
After commissioning requirements:
1 , the overlapping portions of the belt rollers are in the upper six PSK .
2 , tubular belt turn the snake does not occur .
3, PSK care stick good contact with the belt .
4 , gear, motor vibration, temperature to meet the requirements.
5 , when to start and stop , tensioning device is working properly, the tape without skidding .
6 , not a scratch tape and do not allow the existence of the phenomenon of friction .
7 , when the coal, the entire roller should be flexible rotation .
8, the bearing operating temperature should be stable , bearing temperature <65 ℃, Rolling temperature <80 ℃.
9 , bearing and rotating parts no abnormal state.
10 , no oil spills, oil phenomenon .
11, the control system is properly flexible running operation .
12 , to contribute up to standard.
13 , interlocks and various accidents buttons work well .
14 , the gap chute between rubber apron and tape appropriate .
15, a hydraulic coupling without fever phenomenon .