Screw conveyor trends

Screw future trends will mainly the following aspects:
    1 , large capacity , high speed, long life.
    2 , environmentally conscious design , reduce pollution and achieve green design goals.
    3, the space can be curved Gravity roller conveyor conveyor . Horizontal and vertical screw conveyor lines are limited intelligent transport of materials , in recent years there has been flexible

screw conveyor , conveyor and other spring .
    4, the intelligent development . Future use of computers in close contact screw machine , suitable for process control, intelligent operation . Material handling,

installation and maintenance of the machine should be able to achieve intelligent management.
    5, low energy skate roller conveyor consumption and reduce energy consumption . The vast majority of screw machine energy consumption on the friction losses . Thus reducing the energy consumption

is the study and design of screw machine urgent problem and direction of development .
    6 , the combination of composite conveyor toward the large-scale development . Use screw conveyor , combined with a variety of continuous conveyor machinery, to complete the

complicated material handling. Including large-scale large transmission capacity . Single length and large transmission angle and other aspects.

Vibrating conveyor speed control method

    Vibrating conveyor is mainly used for horizontal or small angle case of transport in bulk or granular bulk materials , but also particle size of not more than 74μm

conveying powder materials. Throughput 90 degree turn conveyor craft often have certain requirements ( regularly changing ) , while the throughput due to the moisture content of the material

, Clay content , roller chain conveyor particle size , voltage fluctuations and other factors , will produce some change, so need speed . Vibrating conveyor speed control There are three ways :
    1, such adjustment of the amount of transportation requirements are not too high, the vibrating conveyor device of the vibration motor can be adjusted and fixed angle

between the eccentric block size to achieve speed, but the trouble is not slow ;
    2, with the drive to change the vibration of the motor speed to achieve speed , this method is speed performance, but the cost is high ;
    3 , with the general vibration motor regulator to change the voltage to achieve speed , speed performance , low cost, easy to use into the frequency .

Screw the rules Introduction

Screw conveyor is commonly used in transportation equipment, rational use of screw conveyor can greatly reduce our production costs , including its use before the job , the job

, the job , the following January 1.
Screw conveyor safety procedures are:
First, the operator must ensure that sufficient classes before the break , to ensure energetic ; posts before to Wear flexible conveyor protective equipment.
Second, all the staff are not allowed to cross the conveyor screw conveyor during operation , are not allowed to open the cover , are not allowed into his body , or other debris

inside the screw conveyor .
Third, the torque converter Telescopic belt conveyor should be required to use the specified oil to maintain proper oil level , and add a protective cover.
Fourth, non- duty personnel on duty are not allowed to operate conveyors, non-native workers allowed to enter the conveyor corridor .
Fifth, strong overload conveyor screw conveyor is strictly prohibited .
Six , before operation
1 Press the technical operating requirements check the mechanical parts and no-load running test to confirm compliance with the requirements. Check the communication device

system, confirm contact signal clear and accurate.
(2) The inspection trials met the conditions of use , to confirm the control for safety and good safety records to confirm the time and confirm the name, archived for future

reference .
Seven , job
1 strictly in accordance with the control signal instructions for mechanical operation.
(2) Check the operation prohibited wear gloves mechanical parts .
3 on-site manual operation, the material to be self- terminus tail sequence starting after the front and rear ; spiral head from front to back loading terminus sequence

downtime.
4 in strict accordance with the material requirements of steering control output conveyor throughput , prevent material overflow warehouse, tank overflow tank or cause strong

squeeze .
5 are not allowed to open a variety of protective cover and tank cover shall not carry the machine repair, maintenance and dismantling .
6 To stop the job before unloading conveyor material inside , so that the machinery is in idle state ready for shutdown processing .
Eight , job
1 mechanical thorough cleaning , maintenance , lubrication and rust , machinery require water spray , shall close the electrical part cover to prevent water washout damp.
(2) on the transport corridor and the control of electrical machines for dust removal , dehumidification process , the liquidation shall be required to restore them closed

Screw the rules Introduction

Screw conveyor is commonly used in transportation equipment, rational use of screw conveyor can greatly reduce our production costs , including its use before the job , the job

, the job , the following January 1.
Screw conveyor safety procedures are:
First, the operator must ensure that sufficient classes before the break , to ensure energetic ; posts before to Wear flexible conveyor protective equipment.
Second, all the staff are not allowed to cross the conveyor screw conveyor during operation , are not allowed to open the cover , are not allowed into his body , or other debris

inside the screw conveyor .
Third, the torque converter Telescopic belt conveyor should be required to use the specified oil to maintain proper oil level , and add a protective cover.
Fourth, non- duty personnel on duty are not allowed to operate conveyors, non-native workers allowed to enter the conveyor corridor .
Fifth, strong overload conveyor screw conveyor is strictly prohibited .
Six , before operation
1 Press the technical operating requirements check the mechanical parts and no-load running test to confirm compliance with the requirements. Check the communication device

system, confirm contact signal clear and accurate.
(2) The inspection trials met the conditions of use , to confirm the control for safety and good safety records to confirm the time and confirm the name, archived for future

reference .
Seven , job
1 strictly in accordance with the control signal instructions for mechanical operation.
(2) Check the operation prohibited wear gloves mechanical parts .
3 on-site manual operation, the material to be self- terminus tail sequence starting after the front and rear ; spiral head from front to back loading terminus sequence

downtime.
4 in strict accordance with the material requirements of steering control output conveyor throughput , prevent material overflow warehouse, tank overflow tank or cause strong

squeeze .
5 are not allowed to open a variety of protective cover and tank cover shall not carry the machine repair, maintenance and dismantling .
6 To stop the job before unloading conveyor material inside , so that the machinery is in idle state ready for shutdown processing .
Eight , job
1 mechanical thorough cleaning , maintenance , lubrication and rust , machinery require water spray , shall close the electrical part cover to prevent water washout damp.
(2) on the transport corridor and the control of electrical machines for dust removal , dehumidification process , the liquidation shall be required to restore them closed

Stainless steel mesh belt and analysis of prospects for the development

In the international market , the stainless steel mesh belt products have been widely spread and applied , while the domestic current situation is that although some medium-

sized enterprises to start using Flexible Roller Conveyor stainless steel mesh belt assembly line production operations , but most enterprises are still the original artificial hand operation mode of

production

Style . This is China stainless steel mesh belt industry provides a vast potential market and prospects. Believes that the future of domestic stainless steel mesh belt market

prospects as follows:
One in product quality
But also on the yield and quality Power Roller Conveyor icing on the cake , to create a sophisticated , high-quality products , quality must be stable to be solid, not only to meet the exact process

requests , to ensure that the chain mesh belt mesh chain processing quality , while severely grasp enterprise manufacturing norms, every success goes to

Step progress abrasive tooling and manufacturing equipment, the use of chain life and stability robustness .
Two in the product categories
In stainless steel mesh belt on product categories have increased from time to time , not only to carry out horizontally , but also vertically launched , progressive product

breadth and depth to bedrock in the original extended from time to time extensions , and more important to Network access, trying to complete the development of large size

should strive

Network chain belt chain assembly machines.
Three on the number of products
In the mesh belt to be effective on a number of products increased and extended , not only to meet domestic mesh belt, mesh chain , chain enterprises growing consumer demand ,

but also to adapt to foreign consumption chain mesh belt mesh chain launched the latest situation and actively expand exports amount of active network chain belt for foreign

Chain enterprises to provide the needs of their network chain belt chain equipment .
Four in the manufacturing chain technology
In the manufacturing chain, either technically when developing new products and innovations will have a way out, not only to carry out domestic firm with existing equipment, a

variety of advanced research results chain , trying to reduce equipment with international advanced chain gap between more going to learn, digest international advanced

technology

Bedrock on the industry, academia , research new product development phase separation thoughts , to carry out sophisticated , efficient , pipeline, professional, automated

system linked the latest technology, invented with Chinese independent intellectual property rights of the modern advanced technology and manufacturing chain with chain .
Five in the implementation of applications
In implementing applications to speed up the implementation efforts, advanced technology and manufacturing chain with chain not only within the industry in the manufacturing

chain of large Chinese enterprises in the main rapid and timely application , but also to increase investment in the improvement of the whole industry chain system

implementation efforts, this will facilitate the opening of the chain equipment market

Show, further progress of the industry's overall level of the chain and manufacturing chain competitiveness of the enterprise center positive and important role.

Belt Conveyor Modern Automation Manufactory

Belt Conveyor Modern Automation Manufactory

Development and Prospect of transportation equipment

Conveyor equipment will be toward the future large-scale development, to expand the scope, automatic sorting of materials, reduce energy consumption, reduce pollution and other

aspects of development.

Large transmission capacity, including large-scale, Food conveyor large single length and large transmission angle and other aspects. The length of the hydraulic conveyor belt has reached

more than 440 km length of nearly 15 km of single, and has appeared composed by a number of Taiwan Contact B two places "belt conveyor path." Many

Countries are exploring long-distance, large-capacity belt conveyor design transport of materials better continuous conveyor structure.

Expand the use of the conveyor, is developing in high temperature, low temperature conditions, corrosive, radioactive, flammable substances in the work environment, as well as

capable of delivering fiery, explosive, agglomerate, viscous material conveyor equipment .

TD75 type belt with common and DT Ⅱ type conveyors. Belt conveyor.